IMAG0246

 
The newly created door

A hub 2, with the A-sized struts radiating from the hub. The upper two struts have been joined by a new piece of lumber; one side cut at 29 degrees, 8 degree camber, and the other side 31 degrees, 8 degree camber.

The new piece of lumber is held in place using 5mm x 60mm chipboard screws and cold wood glue.

I have added extra strips to join the outer edges of each A-strut, which will support the Marlon 4mm Multi-wall polycarbonate sheet when it gets attached to the door.

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)